Licensed & Insured, in Topeka and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Topeka
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (785) 329-9753 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Topeka and surrounding areas · On-site visits included · Free estimate within 24h
Topeka Metal Roofing is a team of local certified professionals based in Topeka. We respond quickly in Topeka and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (785) 329-9753⭐⭐⭐⭐⭐ 4.9/5 · 298 verified Google reviews
“Needed a new metal roof on our hay barn out past Meriden and these guys knocked it out in about three days. The corrugated panels went on straight and they cleaned up every last screw and scrap piece before they left. Way sturdier than the old rusted roof we had.”
Commercial & Agricultural Metal Roofing
“We had the old copper roof over our front porch replaced and honestly it looks even better than the original. The crew was careful around the brickwork and the new copper flashing is seamless. A bit of a splurge but worth every penny.”
Copper & Specialty Metal Roofing
“Called them out to check the metal roof on our equipment shed and they gave us a straight answer instead of trying to sell us a whole new roof. Turned out a few fasteners needed replacing and that was it. Appreciated the honesty.”
Metal Roof Inspection
“After two summers of hail beating up our old shingles we finally went standing seam and I wish we'd done it years ago. The crew of four had the whole house done in under a week and the cleanup was spotless. The dark bronze finish looks sharp too.”
Standing Seam Metal Roofing
“Had them reseal and reflash around our skylight and chimney where the metal roof was leaking during heavy rain. They got it done in one afternoon and we've had zero drips since. Only gripe is they were about an hour late, but the work itself was solid.”
Flashing, Chimney & Skylight Repair
“We did the metal-over-shingles retrofit on our brick ranch and it saved us a ton versus a full tear-off. The crew laid down the underlayment and panels clean and you can't even tell there are shingles underneath. Neighbors have already asked for their number.”
Metal Roof Over Shingles (Retrofit)
“Replaced the failing metal roof on our brick house after it started rusting through in a few spots. They hauled off all the old panels, put up new ribbed steel, and even fixed a couple of gutter runs for us. Took about four days total and the yard was cleaner than when they started.”
Metal Roof Replacement
“Went with stone-coated steel on our pavilion-style house after the old roof started looking rough. The finish gives it that shingle look but with the metal durability, and the crew handled the tricky slope changes without any issues. Communication could've been a little better on scheduling, but the final result is beautiful.”
Stone-Coated Steel RoofingReal photos of our work in Topeka · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener R-panel install | Starting at $8/sq ft | Includes panels, underlayment, fasteners and basic trim; pitch and roof complexity move the price up. |
| Standing seam install | Starting at $14/sq ft | Concealed fasteners, full underlayment and custom flashing; roof pitch and penetration count drive the range. |
| Metal shingle or stone-coated steel | Starting at $12/sq ft | Includes textured panels and trim; dormers, chimneys and steep gables add labor and flashing time. |
| Tear-off and deck repair | On estimate | Layer count, sheathing condition and disposal access decide the number after an on-site look. |
| Travel | Included | In Topeka and surrounding Shawnee County communities, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (785) 329-9753, with no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Snap-lock standing seam | Starting at $10/sq ft | Concealed-fastener panels with underlayment, clips and standard flashing included; pitch and access move the rate. |
| Mechanically seamed standing seam | Starting at $13/sq ft | Double-locked raised seams for maximum wind resistance; steeper roofs and complex layouts push the price up. |
| Tear-off and deck repair | Quoted per job | Removing existing layers and replacing soft sheathing; layer count and deck condition set the add-on. |
| Complex or large-scale job | On estimate | Multiple pitches, heavy flashing or limited staging around mature oaks need an on-site look before pricing. |
| Travel | Included | In Topeka and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener panel replacement | Starting at $9/sq ft | Full tear-off, deck inspection, new underlayment and corrugated or ribbed panels installed |
| Standing seam replacement | Starting at $13/sq ft | Concealed-fastener panels, new flashing and edge metal, priced by pitch and panel gauge |
| Metal shingle or stone-coated steel | Starting at $14/sq ft | Textured or stamped panels that mimic slate or shingle, includes detail work at valleys and dormers |
| Complex or large-scale job | On estimate | Steep pitches, multiple dormers, historic profiles or heavy deck repair need an on-site look first |
| Travel | Included | In Topeka and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed-fastener retrofit over existing shingles | Starting at $7/sq ft | R-panel or corrugated steel, new trim, ridge vent and underlayment over a sound deck. |
| Standing seam retrofit | Starting at $11/sq ft | Concealed-clip panels with raised seams, priced higher on steep or cut-up roofs. |
| Stone-coated or metal shingle retrofit | Starting at $10/sq ft | Granulated or pressed steel shingles for historic-district and HOA homes needing traditional look. |
| Deck repair and flashing work | On estimate | Rotten sheathing, chimney and skylight flashing priced after the attic and roof inspection. |
| Travel | Included | In Topeka and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (screws, sealant, small flashing) | Starting at $450 | Covers resealing penetrations and replacing a handful of fasteners; access and roof pitch move the price. |
| Panel replacement (1 to 3 panels) | Starting at $850 | Includes matching gauge and profile panels plus re-fastening; steep gables and two-story access add cost. |
| Flashing and chimney rebuild | Starting at $700 | New step and counter flashing around chimneys and skylights; height and material type drive the range. |
| Storm or hail damage repair | On estimate | Scope depends on how many panels are dented and whether insurance documentation is involved. |
| Travel | Included | In Topeka and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single leak diagnosis and repair | Starting at $450 | Includes roof walk, leak tracing, and a straightforward fastener, washer, or pipe boot fix. |
| Fastener and washer replacement | Starting at $650 | Priced by the number of fasteners and roof access, common on exposed-fastener corrugated panels. |
| Flashing rebuild (chimney, skylight, wall) | Starting at $850 | Includes new metal counterflashing and step flashing, priced by penetration count and pitch. |
| Emergency tarping after storm | Starting at $350 | Same-day temporary cover when weather allows, priced by roof size and access difficulty. |
| Complex or large-scale leak repair | On estimate | Multiple leak points, rotted decking, or panel replacement need an on-site look before pricing. |
| Travel and estimate | Free estimate | No mileage fee in Topeka and surrounding areas, response within 24 hours at (785) 329-9753. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential re-fastening, single field | Starting at $750 | Includes fastener count, pull and replace failed screws, and UV-rated washers on one roof field. |
| Full roof re-fastening, single-story home | Starting at $1,450 | Covers every field on a typical Topeka ranch roof, with pitch and fastener count moving the price. |
| Barn or machine shed re-fastening | Starting at $1,900 | Priced by square footage and panel count, common on rural Shawnee County outbuildings. |
| Wallowed hole repair and re-seat | On estimate | Needs an on-site look to judge how many holes are stripped and whether panels can be saved. |
| Travel | Included | in Topeka and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof | Starting at $5.50/sq ft | Includes 29 or 26-gauge corrugated panels, underlayment and basic trim; pitch and deck condition move the price. |
| Ribbed R-panel roof | Starting at $6.25/sq ft | Includes 26-gauge R-panel, color-matched screws, closures and ridge trim; roof complexity and access affect the rate. |
| 5V crimp panel roof | Starting at $6.75/sq ft | Includes 5V crimp panels with underlayment and trim; steeper pitches and historic district requirements add cost. |
| Retrofit over existing shingles | Starting at $5.75/sq ft | Includes deck inspection, panels over a single sound shingle layer; number of existing layers and deck repairs move the price. |
| Barn, shop or machine shed | On estimate | Large agricultural roofs need an on-site look at purlins, span and access before we quote a number. |
| Estimate | Free | Response within 24 hours at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof installation | Starting at $9/sq ft | Includes underlayment, flashing, and standard metal shingle panels; pitch and roof complexity move the price. |
| Metal shingle roof replacement | Starting at $11/sq ft | Includes tear-off of existing shingles, deck inspection, and new metal shingle system; number of layers affects cost. |
| Metal shingle repair (wind or hail) | Starting at $450 | Covers damaged panel replacement and flashing repair; access and panel matching drive the final number. |
| Metal shingle roof over existing shingles | Starting at $8/sq ft | Retrofit where code allows; deck condition and existing layer count determine whether it is viable. |
| Complex or large-scale metal shingle job | On estimate | Steep gables, dormers, multiple valleys, and historic or HOA review need an on-site look before pricing. |
| Estimate | Free | Response within 24 hours at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel, standard profile | Starting at $9/sq ft | Installed with underlayment and standard flashing on a simple-pitch roof, price rises with complexity. |
| Premium shake or slate profile | Starting at $11/sq ft | Textured premium panels with deeper shadow lines, cost moves with profile and color selection. |
| Tear-off and re-deck | Starting at $2/sq ft additional | Removal of existing shingles, disposal, and deck repair, priced by layer count and deck condition. |
| Retrofit over existing shingles | On estimate | Code limits the number of existing layers, so we inspect the deck and layer count before pricing. |
| Complex or steep-pitch roof | On estimate | Multiple valleys, dormers, and steep pitches need an on-site look for labor and waste factors. |
| Estimate and travel | Free, included | Free written estimate in Topeka and surrounding areas, no mileage fee, response within 24 hours. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper porch or bay window roof | Starting at $20/sq ft | Flat-lock or standing seam copper installed with new underlayment and formed flashing. |
| Zinc or aluminum accent roof | Starting at $18/sq ft | Panel or flat-lock system for dormers, porches, and low-pitch sections. |
| Full architectural copper roof | On estimate | Steep pitches, multiple valleys, and hand-soldered details need an on-site measure. |
| Historic restoration or custom fabrication | On estimate | Ornamental profiles, curved panels, and church steeples require shop and site time. |
| Travel | Included | in Topeka and surrounding Shawnee County areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic prep and reflective coating | Starting at $2.50/sq ft | Includes cleaning, spot rust treatment and one reflective topcoat on accessible panels |
| Full restoration with fastener work | Starting at $3.75/sq ft | Adds failed screw replacement, penetration sealing and a two-coat system |
| Steep or complex roof | On estimate | Steep pitch, dormers, valleys and height drive labor and fall protection cost |
| Travel | Included | In Topeka and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single chimney flashing repair | Starting at $600 | Includes removal of old flashing, custom bending, and installation for one standard chimney. |
| Skylight flashing repair | Starting at $750 | Covers one skylight with ladder access; higher curbs and steep roofs move the price up. |
| Valley or wall transition flashing | Starting at $850 | Includes open valley or step flashing rebuild; debris-clogged valleys and dormers add labor. |
| Hail-damaged flashing replacement | On estimate | Needs an on-site look because dented flashing often hides damaged underlayment beneath. |
| Travel | Included | In Topeka and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential pad guards over entries and walks | Starting at $1,200 | Covers a typical single-family roof with guards over the main entry and walkway, spacing included. |
| Bar and rail system on a low-pitch roof | Starting at $1,800 | Continuous rail over driveways or long eaves, priced by linear feet and bracket count. |
| Standing seam non-penetrating seam clamps | Starting at $1,500 | Clamp-mounted guards that protect the panel warranty, priced by seam length and clamp count. |
| Commercial or agricultural snow fence | On estimate | Long R-panel runs and heavy snow loads need an on-site look before we quote. |
| Travel | Included | In Topeka and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof and attic inspection with photo documentation, no obligation to book. |
| Minor repair (screws, sealant, small flashing) | Starting at $250 | Replacing backed-out screws, resealing penetrations, and minor flashing fixes, price depends on roof height and access. |
| Panel replacement or flashing rebuild | Starting at $650 | Removing and replacing damaged panels or rebuilding chimney and skylight flashing; cost rises with panel count and pitch. |
| Insurance claim documentation | Included | Photo report and written scope prepared for your insurer at no extra charge when we do the repair. |
| Travel | Included | In Topeka and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Residential metal roof inspection | Free estimate | Walk-over inspection with photo report; roof size and pitch move the final price. |
| Fastener and seam audit | Starting at $250 | Hand and driver testing of every fastener plus seam checks; roof age and panel count qualify the rate. |
| Hail and storm damage assessment | Starting at $300 | Dent mapping and written damage report for insurance; number of roof planes and penetrations move the price. |
| Pre-purchase or insurance documentation | On estimate | Detailed photo report and remaining service life opinion; scope depends on access and roof complexity. |
| Travel | Included | In Topeka and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard run | Starting at $9/linear ft | Includes forming, hangers and basic downspout; price rises with trough size and stories |
| Standing seam clamp system | Starting at $14/linear ft | Non-penetrating seam clamps and hidden hangers; higher hardware cost moves the number |
| Leaf protection screens | Starting at $6/linear ft | Mesh or screen covers added to the run; heavy oak debris raises the value |
| Complex or large-scale job | On estimate | Multi-story, long runs or fascia repair need an on-site look before pricing |
| Travel | Included | in Topeka and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Barn or machine shed re-roof | Free estimate | Includes roof and fastener inspection, panel recommendation, and a written scope for the building |
| Commercial standing seam installation | Starting at $12,000 | Covers panel system, underlayment, trim, and flashings; building size and pitch move the number |
| Screw replacement and re-fastening | Starting at $850 | Replaces backed-out and rusted screws with gasketed fasteners; roof area and access affect the price |
| Retrofit over existing roof | On estimate | Needs an on-site look at deck condition, code layer limits, and penetration layout before pricing |
| Travel | Included | in Topeka and surrounding Shawnee County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (785) 329-9753, no obligation to book the work |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Topeka need a crew that understands the local housing stock and the weather that hammers it. Topeka Metal Roofing is that local resource, a network of licensed, bonded, and insured contractors who install, replace, re-roof, and repair metal roofing across the capital region. From the steep gables of Potwin and College Hill to the low-slope ranches of Highland Park and the newer subdivisions out toward Sherwood and Silver Lake, we match the system to the home, not the other way around. We also serve Lawrence, Auburn, and Rossville, handling everything from standing seam on a Craftsman bungalow to corrugated panels on a barn or machine shed.
This is hail country, and the roofs here take a beating from spring storms, ice dams, and freeze-thaw swings. That is why so many properties carry aging screw-down roofs whose fasteners are due for service. Whether you need a full Metal Roof Installation or a targeted repair, we give straight guidance on what your roof actually needs. Call (785) 329-9753 to schedule a free estimate and get an honest read on repair versus replacement.
Most metal roof leaks in Topeka trace back to a handful of predictable failures. On 15 to 30 year old exposed-fastener roofs, the number one culprit is fasteners backing out as their EPDM sealing washers dry, shrink, and crack. Once that seal fails, water slips past the screw head and into the assembly. Seam separation from thermal movement is another common issue, especially on longer panels that expand and contract through hot summers and cold winters. Failed pipe boots and flashing at chimneys, skylights, and valleys let water in at the most vulnerable transitions, while wind-lifted panels after a storm and punctures from fallen limbs create sudden, obvious openings.
Ignoring these problems is expensive. Water tracks along purlins and decking far from the entry point, so a small leak at a fastener can rot sheathing and saturate insulation well away from the stain on your ceiling. By the time you see interior damage, the repair scope has often grown. Our Metal Roof Leak Repair team finds the true source, not just the symptom, and fixes it with the right closure, boot, or flashing detail.
The honest call between repair and replacement depends on the roof's age, panel condition, and how widespread the failures are. Often, a full screw replacement restores a watertight roof for a fraction of replacement cost, especially when the panels and finish are still sound. We will tell you plainly when that is the right move and when it is not. Call (785) 329-9753 or contact us to schedule an inspection.
We install the full range of metal systems, and the right choice depends on your home, budget, and how much maintenance you want to own. Standing Seam Metal Roofing is the premium option: concealed clips, clean lines, and no exposed screws to service. Corrugated & Ribbed Panel Roofing is the economical workhorse, ideal for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The trade-off is simple: standing seam costs more up front and has no exposed fasteners to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) can be a legitimate way to save on tear-off, but when the decking is compromised, a full tear-off is the right call. We will walk you through both.
Metal roof projects are typically quoted per square foot for installations, while repairs are often flat-rate. The final number depends on the panel system and metal gauge, roof pitch and complexity, whether we tear off or recover, decking condition, and access. Because those factors vary so much from one Topeka roof to the next, we frame all figures as typical ranges only. Final pricing depends on the roof and site conditions, and we confirm it in writing after an on-site assessment. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clear picture of how systems compare, see our pricing page, then request a free estimate or free roof inspection so we can give you a real number for your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, the rules are informational only: in most jurisdictions a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Topeka building or planning department before starting your project. Contact us with questions about documentation or scheduling.
Ready to get started? Topeka Metal Roofing serves in Topeka and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Topeka · Response within 24h · No commitment · ☎ (785) 329-9753
Your Free Quote Request