Serving the Topeka area  ·  (785) 329-9753  ·  Open Mon-Sun 7am-7pm
📞 (785) 329-9753 Free Quote

Metal Roofing in St. Marys, KS (66536) · Local Professionals

Topeka Metal Roofing · Fast response in St. Marys and the Topeka area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+298Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

St. Marys sits just west of Topeka along US-24, where the prairie opens up and the older homes and farm lots take a real beating from Kansas weather. If you own one of the Victorians near downtown, a mid-century ranch off Maple Street, or a farmhouse out toward the Kaw River valley, you already know that hail and straight-line wind are not abstract threats here.

Homeowners in St. Marys (66536) call Topeka Metal Roofing because we understand the specific mix of historic housing stock and agricultural buildings that define this town. From the steep gables near the old depot to the low-slope machine sheds west of town, we have seen what fails first and how to fix it so it lasts.

Metal Roofing in St. Marys (66536)

St. Marys is a town of contrasts. Downtown you have tightly packed older homes on narrow lots with mature trees, which means tight access and a lot of debris management. Head west on US-24 and the lots open up into farmsteads with long driveways, outbuildings, and wide-open exposure to wind. The ground here is clay-heavy, so drainage around downspouts and gutters matters as much as the roof itself. We routinely deal with steep Victorian pitches that require careful staging and fall protection, as well as low-slope porches and additions where panel choice and fastening patterns have to be adjusted for proper water shedding. The freeze-thaw cycles in winter are hard on flashing and fasteners, and summer hail can dent or loosen panels on even a well-installed roof.

Our team has worked across Shawnee County and the surrounding rural areas for years. We know the difference between a roof that just looks fine after a storm and one that is actually sealed and secure. Whether it is a historic home near the St. Marys Golf Course or a modern build on the edge of town, we bring the same approach: assess honestly, recommend what fits, and install it right.

Our services in St. Marys

How a Job Works in St. Marys

Step 1: You call us at (785) 329-9753 or request a free estimate online. We schedule a time to come out to your property in St. Marys, walk the roof and the attic if accessible, and take photos. You get a written assessment and a clear scope of work, no pressure and no vague numbers.

Step 2: Once you approve the estimate, we pull the required permits with the local building department (rules vary by jurisdiction, so we verify everything before work starts). On install day, our crew arrives with materials and equipment sized for your lot. On tighter streets near downtown, we stage carefully to keep driveways and sidewalks clear. For farm properties west of town, we coordinate around equipment and livestock. We protect landscaping and keep the site secure each night.

Step 3: When the work is done, we do a full magnetic sweep for nails, clean gutters and downspouts of debris, and walk the finished roof with you. We do not consider the job complete until you have seen the details and signed off. Our team leaves your property clean and your roof ready for the next Kansas storm.

Pricing for metal roofing in St. Marys depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10 per square foot, and metal roof replacement from $9 per square foot. If you are retrofitting over existing shingles, that starts around $7 per square foot. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. For a typical single-story ranch, a full replacement might land in the low five figures, while a small repair could be a few hundred dollars. We give you a written estimate after a free on-site assessment, so you know exactly what you are paying for. Call (785) 329-9753 to schedule yours.

My house is near downtown St. Marys and has a steep Victorian roof with original details. Can you install metal without ruining the look?
Yes. We work with metal shingle and standing seam profiles that mimic the scale and shadow lines of traditional slate or shingle roofs. We can also match colors that fit the historic character of the neighborhood. The key is choosing a panel profile and color that respects the architecture, and we will walk you through samples before you commit.
A storm just took off some shingles and I have water coming in. How fast can you get to St. Marys for an emergency repair?
We prioritize active leaks and storm damage. Call us at (785) 329-9753 and we will schedule the soonest available inspection, often within a day or two depending on storm volume. We can usually tarp or make temporary repairs to stop the water while we prepare a permanent fix.
What does a typical metal roof replacement cost for a ranch-style home in St. Marys?
For a standard single-story ranch with a low-slope roof, most replacements fall between $12,000 and $22,000 depending on the material, roof complexity, and whether we remove the old shingles. Standing seam is at the higher end, corrugated or ribbed panels at the lower end. We provide a detailed estimate after seeing your roof.
Do I need a permit to replace my roof in St. Marys, and do you handle it?
Roofing permits are commonly required for a full replacement or re-roof in St. Marys, and the rules are set by the local building department. We verify the current requirements with the city and pull the permit on your behalf as part of the job. Fees and inspection timelines vary, so we confirm everything before scheduling.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage problems for them. What do you do?
We assess drainage and water flow during the estimate, especially on tight lots near downtown. If your roof runoff would be directed toward a neighbor's property, we can adjust gutter placement or add downspout extensions to keep water on your side. We also check for any HOA or historic district rules that might affect panel choice or color.
Are you fully insured for work on my St. Marys property?
Yes. We carry general liability insurance and workers' compensation coverage for our crews.
What maintenance should I do on my metal roof in St. Marys to prevent winter ice dams?
Ice dams form when heat escapes through the roof and melts snow that refreezes at the eaves. Make sure your attic is well insulated and ventilated. Keep gutters clear of leaves and debris, especially in late fall. After major storms, check for loose fasteners or lifted panels. We offer inspections and can install snow guards or ice protection if you have had problems before.
Why choose us?

Trusted professionals in Topeka

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Topeka

All your work handled by qualified professionals in Topeka

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

298+ Verified Client Reviews in Topeka

⭐⭐⭐⭐⭐ 4.9/5 · 298 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Topeka · Response within 24h · No commitment · ☎ (785) 329-9753

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Topeka ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm