Serving the Topeka area  ·  (785) 329-9753  ·  Open Mon-Sun 7am-7pm
📞 (785) 329-9753 Free Quote

Metal Roofing in Lecompton, KS (66050) · Local Professionals

Topeka Metal Roofing · Fast response in Lecompton and the Topeka area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+298Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lecompton is a small historic town on the Kansas River with a big story, and its homes and farm buildings show it. From the brick and stone structures near Constitution Hall to the older farmhouses and machine sheds out along the river bottoms, roofs here take a beating from hail, wind, and freeze-thaw cycles.

Homeowners in Lecompton (66050) call Topeka Metal Roofing because we understand the mix of historic character and practical farm needs. Whether it is a copper accent on a Victorian near the old lane or a corrugated panel on a barn off Route 40, we bring the right materials and careful workmanship.

Metal Roofing in Lecompton (66050)

Lecompton sits where the Kansas River bends and the land rises into rolling hills and limestone outcrops. The housing stock ranges from mid-1800s brick and stone buildings in the historic core to mid-century ranches and newer homes on larger lots. Many properties have mature oaks and cottonwoods that drop limbs, and the clay soil holds water after storms, so drainage and flashing details matter. Steep gables on older homes and low-slope roofs on additions and outbuildings require different metal systems. Farm buildings often need corrugated or R-panel roofs that stand up to wind and hail without breaking the budget.

Our team has worked across Shawnee County and the surrounding areas, including Lecompton, Perry, and the rural stretches along the river. We know how hail bruises metal, how ice dams form at eaves on older homes, and how to handle historic district considerations. We are fully insured with general liability and workers' compensation, so you are protected.

Our services in Lecompton

How a Job Works in Lecompton

Step 1: You call (785) 329-9753 or request a free estimate online. We schedule an on-site assessment, inspect your roof and attic, check flashing and fasteners, and talk through options and budget. We provide a written estimate with clear pricing.

Step 2: Once you approve, we pull the required permits from the local building department and coordinate any historic or HOA review. Our crew arrives with materials and equipment, protects your landscaping, and works efficiently. On tight lots or steep grades, we plan access carefully to avoid damage.

Step 3: After installation or repair, we clean the site thoroughly, haul away old materials, and walk the roof with you to confirm everything is done right. We do not leave until you are satisfied.

Pricing for metal roofing in Lecompton depends on the job. Metal roof installation starts at $8 per square foot, standing seam at $10, replacement at $9, and over-shingle retrofit at $7. Repairs start at $450, screw replacement at $750, and coatings at $2.50 per square foot. Specialty copper runs from $20 per square foot. Factors like roof size, pitch, access, existing layers, and urgency affect the final cost. We give free estimates and explain all options. Call (785) 329-9753 to schedule yours.

My historic home near Constitution Hall has a steep gable and original trim. Can you match metal roofing without ruining the look?
Yes. We work with standing seam, metal shingle, and stone-coated steel in profiles and colors that respect historic character. We also handle required historic review and can suggest low-profile panels for visibility from the street.
A storm just peeled back panels on my barn off Route 40. How fast can you get out for emergency repair?
We prioritize storm damage calls in Lecompton and surrounding areas. Call (785) 329-9753 and we will schedule an inspection, usually within 24 to 48 hours, and make temporary repairs if needed to prevent further damage.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Lecompton?
For a ranch that size, replacement typically ranges from $9,000 to $15,000 depending on panel type, roof complexity, and whether we remove existing shingles. We provide a detailed free estimate after inspecting your roof.
Do I need a permit to replace my roof in Lecompton, and can you help with that?
Yes, roofing permits are generally required for replacement or re-roof. Requirements vary, so we verify with the local building department and handle the paperwork as part of our service.
My neighbor and I share a property line, and I want to make sure my new metal roof does not cause drainage issues on their side. What should I do?
We design gutter and flashing systems to direct water away from property lines and follow local setback rules. If you have an HOA, we can coordinate color and style approval. We also recommend talking with your neighbor before work begins.
Are you fully insured for work on my Lecompton property?
Yes, we carry general liability and workers' compensation insurance.
What maintenance does a metal roof need in Lecompton's climate?
Inspect fasteners and seals annually, especially after hail or wind storms. Clear debris from valleys and gutters, and touch up scratches to prevent rust. We offer inspection and maintenance plans to keep your roof in top shape.
Why choose us?

Trusted professionals in Topeka

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Topeka

All your work handled by qualified professionals in Topeka

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

298+ Verified Client Reviews in Topeka

⭐⭐⭐⭐⭐ 4.9/5 · 298 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Topeka · Response within 24h · No commitment · ☎ (785) 329-9753

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Topeka ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm