Serving the Topeka area  ·  (785) 329-9753  ·  Open Mon-Sun 7am-7pm
📞 (785) 329-9753 Free Quote

Metal Roofing in Lawrence, KS (66045) · Local Professionals

Topeka Metal Roofing · Fast response in Lawrence and the Topeka area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+298Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Lawrence, Kansas, is a city where century-old homes near the university meet newer subdivisions out west, and every roof has to stand up to hail, wind, and ice. From the steep gables of Old West Lawrence to the low-slung ranches off 6th Street, we know the housing stock here because we've worked on it for years.

Homeowners in the 66045 area call Topeka Metal Roofing because we understand the local challenges, from historic district rules near the KU campus to the straight-line winds that tear across the prairie. We're based in Topeka, just a short drive away, and we bring fully insured crews who specialize in standing seam and metal roof replacement for Lawrence properties.

Metal Roofing in Lawrence (66045)

Lawrence sits in the rolling hills of northeast Kansas, and the terrain here matters. Many homes are built on sloped lots with mature trees, which means access can be tight and drainage is critical. The clay soil holds water after storms, so proper flashing and gutter systems are a must. Older neighborhoods like Pinckney and Oread have narrow streets and mature oaks that drop limbs, while newer developments like West Lawrence have stricter HOA guidelines on roof color and profile. We've seen it all, from ice damming on steep Victorian roofs to wind-lifted panels on 1990s subdivisions.

Our team has been serving Lawrence and the surrounding areas for years, handling everything from small leak repairs to full metal roof installations. We know the local building department's requirements and can help you navigate permits and inspections. Whether you're in a historic home near downtown or a newer build in a subdivision, we tailor our approach to your specific property.

Our services in Lawrence

How a Job Works in Lawrence

Step 1: You call us at (785) 329-9753 or request a free estimate online. We'll schedule a time to come out and inspect your roof, assess the condition, and discuss your options. We'll provide a written estimate with no obligation.

Step 2: Once you approve, we'll pull any necessary permits and schedule the work. In Lawrence, permit timing can vary, especially in historic districts, so we plan ahead. Our crews are experienced with tight lot access and HOA coordination, ensuring a smooth installation without surprises.

Step 3: After the work is done, we do a thorough cleanup, haul away all debris, and walk the property with you to make sure you're satisfied. We leave your yard as clean as we found it, and we're happy to answer any questions.

Pricing for metal roofing in Lawrence depends on the size and complexity of your roof, the material you choose, and the condition of your existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and over-shingle retrofits at $7. Repairs start at $450, and screw replacement at $750. For a typical Lawrence home, a full replacement might range from $15,000 to $30,000, but we provide a free estimate to give you an accurate number. Call us at (785) 329-9753 to schedule yours.

My home in Old West Lawrence is in a historic district. Can I still get a metal roof?
Yes, but you'll need to check with the city's historic preservation office first. Some profiles and colors may be restricted to maintain the neighborhood's character. We can help you choose a metal roof that meets the guidelines and still gives you the durability you want.
How quickly can you respond to storm damage in Lawrence?
We offer free inspections and emergency repairs. After a storm, call us at (785) 329-9753, and we'll schedule a visit as soon as possible. We prioritize active leaks and safety hazards.
What's the average cost of a metal roof repair in Lawrence?
Most repairs start around $450, but the final cost depends on the extent of damage and access. We'll give you a clear estimate before any work begins.
Do I need a permit for a metal roof replacement in Lawrence?
Yes, roofing permits are typically required for replacements. The City of Lawrence website has more details, and we can handle the permitting process for you.
My HOA requires approval for roof color. Can you help with that?
We're familiar with many local HOA requirements and can provide material samples and documentation to help you get approval. We'll work with your HOA to ensure a smooth process.
Are you fully insured for work in Lawrence?
Yes, we carry general liability and workers' compensation insurance for your protection. We're happy to provide proof of insurance upon request.
How often should I have my metal roof inspected in Lawrence?
We recommend an inspection every 2-3 years, especially after severe weather. Regular maintenance can catch small issues before they become costly problems.
Why choose us?

Trusted professionals in Topeka

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Topeka

All your work handled by qualified professionals in Topeka

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

298+ Verified Client Reviews in Topeka

⭐⭐⭐⭐⭐ 4.9/5 · 298 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Topeka · Response within 24h · No commitment · ☎ (785) 329-9753

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Topeka ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm